| 钱琎，张美娜，尹文庆，林相泽.基于CAN-Bus的农业车辆电动转向系统研究[J].广东农业科学,2014,41(15):172-177 |
|
查看全文
HTML
基于CAN-Bus的农业车辆电动转向系统研究 |
| Research on electric steering system for agricultural vehicle based on CAN-Bus network |
| |
| DOI： |
| 中文关键词: 转向自动控制 ITAE性能指标 PD控制器 CAN-Bus通信网络 |
| 英文关键词: automatic steering control ITAE performance index PD controller CAN-Bus network |
| 基金项目:中国博士后科学基金（2013M531372）；江苏省博士后科研计划项目（1301118C） |
|
| 摘要点击次数: 1162 |
| 全文下载次数: 564 |
| 中文摘要: |
| 为实现农业车辆精准快速地自动转向，建立了转向系统模型并设计了转向控制算法。试验平台以车载计算机为CAN主节点，采用CAN-Bus 通信网络与各个监测控制从节点相通信袁CAN 从节点包括前轮转角测量节点尧行驶速度测量节点袁转向电机控制节点与车辆行驶速度控制节点。根据输入量与输出量之间的物理关系建立了转向系统的二阶模型，通过稳定性分析，设计了基于ITAE性能指标的最优PD控制器。试验结果表明，对系统施加依20毅的阶跃输入信号，车辆在农田路面与水泥路面下分别以0.3、0.5、0.7 m/s的速度行驶时袁最优PD控制器均能使系统平稳地跟踪期望的前轮转角，调节时间均在0.35 s以内，稳态误差小于0.5。 |
| 英文摘要: |
| In order to track the desired front wheel angle accurately and rapidly, a steering system model was established and a steering control algorithm was designed for the agricultural vehicle. In the system, the master node (an on-board computer) communicated with four slave nodes (front wheel angle measure node, speed measure node, steering motor control node, driving speed control mode) by CAN -Bus communication network. According to the relationship between the input and output of the steering system, a second-order model was built. And an optimal PD controller based on the ITAE (integral time absolute error) performance index was designed to enhance steering performance. The tests were discussed when the vehicle was driving on the farmland and the cement road at the speed of 0.3 m/s, 0.5 m/s, 0.7 m/s respectively. Test results showed that the steering system tracked the desired front wheel angle smoothly under the desired input signals (依20毅of the front wheel angle). The adjusting time was within 0.35 s and the steady-state error was less than 0.5. |
|
查看/发表评论 下载PDF阅读器 |
