谭飞燕,蒋华,黄寿先,石晓蒙,蒙奕奕,黄家华.中国马褂木无性系嫁接繁殖性状变异[J].广东农业科学,2013,40(5):45-47 |
查看全文
HTML
中国马褂木无性系嫁接繁殖性状变异 |
Grafting experiment of Liriodendron chinense clones |
|
DOI: |
中文关键词: 中国马褂木 无性系 嫁接 变异 |
英文关键词: Liriodendron chinense clones grafting variation |
基金项目:广西科技攻关项目(桂科攻10100012-2);广西“十一五”林业科技项目(林科字2009[16]) |
|
摘要点击次数: 1795 |
全文下载次数: 912 |
中文摘要: |
以15 个中国马褂木无性系为材料进行嫁接试验。结果表明:切接法的嫁接成活率高于芽接法,切接法的平均成活率为53.84%,芽接法的平均成活率为43.83%。不同马褂木无性系间的嫁接成活率存在显著差异,切接成活率最高的无性系为A19-8和B15-2,切接成活率最低的无性系为B11-7;芽接成活率最高的无性系为B17-3,芽接成活率最低的无性系为B10-12 和B11-6。不同无性系间嫁接苗高的生长存在显著差异,苗高最高达43.250cm,最低为21.159 cm。 |
英文摘要: |
This grafting experiment based on 15 clones of Liriodendron chinense. The main results were showed as follows: (1)
Compared to bud-grafting, cut-grafting had higher survival rate. The average survival rate of cut-grafting was 53.84%. And the average survival rate of bud-grafting was 43.83%. (2) There were significant differences between different clones in survival rate by two grafting methods. By cut-grafting, clone A19-8 and B15-2 had the highest survival rate, clone B11-7 had the lowest survival rate. By budgrafting,clone B17-3 had the highest survival rate, clone B10-12 and B11-6 had the lowest survival rate. (3) There was a significant difference between different clones in grafting material height. The highest seedling height was 43.250 cm, the lowest seedling height was 21.159 cm. |
查看/发表评论 下载PDF阅读器 |