| 梁昌聪，刘磊，张建华，郭立佳，杨腊英，王国芬，黄俊生.响应面法优化绿色木霉H06产孢培养条件[J].广东农业科学,2014,41(19):80-85 |
|
查看全文
HTML
响应面法优化绿色木霉H06产孢培养条件 |
| Optimization of fermentation conditions for sporulation quantity by Trichoderma viride strain H06 using response surface methodology |
| |
| DOI： |
| 中文关键词: 响应面法 绿色木霉 产孢 最适培养条件 |
| 英文关键词: response surface methodology Trichoderma viride sporulation quantity fermentation conditions optimization |
| 基金项目:国家公益性行业(农业)科研专项(200903049) |
|
| 摘要点击次数: 1645 |
| 全文下载次数: 765 |
| 中文摘要: |
| 在单因素试验的基础上, 采用响应面法(response surface methodology，RSM)对绿色木霉菌H06 菌株产孢培养条件进行了优化。首先利用Plackett-Burman 试验设计筛选出影响产孢的3 个主要因素: 装液量、接种量和培养温度。在此基础上运用最陡爬坡路径法逼近最大响应值区域，最后利用响应面分析法确定主要因子之间的交互作用及最佳条件。结果显示，绿色木霉H06菌株的最佳发酵条件为：转速200r/min，装液量74.70 mL/250mL，接种量5.83%，pH7.5，温度29.50℃ ,培养时间72 h,菌龄48 h.H06菌株最大理论孢子含量为7.64x10^9个/mL。经3 次平行试验验证，实际平均孢子含量与预测孢子含量相近，比之前的孢子含量提高133%。 |
| 英文摘要: |
| The fermentation conditions for sporulation quantity by Trichoderma viride strain H06 was optimized by response surface methodology (RSM) based on single factor tests. Firstly, three of the most significant influence factors were
screened by the method of Plackett-Burman design as loading volume of liquid medium, inoculum volume and temperature.
The path of steepest ascent was applied to approach the optimal region of the three significant factors. Lastly, the optimal concentration and correlations among three factors were identified by RSM. The optimal fermentation conditions were determined as followed: rotate 200 r/min，loading volume of liquid medium 74.70 mL/250mL，inoculum volume 5.83%，pH
7.5，temperature 29.50℃，time 72 h，bacterium age 48 h. Under these conditions，the maximum theoretic spore number was
7.64*1000000000 mL-1. After three parallel verifications，the maximum theoretic value was consistent with mean value of verification test and the spore number increased by 133% compared to that before optimization. |
|
查看/发表评论 下载PDF阅读器 |
