| 周 开， 倪 伟.基于WSN的保温运输车环境监测系统的设计[J].广东农业科学,2015,42(5):133-138 |
|
查看全文
HTML
基于WSN的保温运输车环境监测系统的设计 |
| Design of environmental information monitoring systemv for insulation truck based on wireless sensor network |
| |
| DOI： |
| 中文关键词: 无线传感器网络 保温运输车 环境信息采集 信号调理 曲线拟合 |
| 英文关键词: WSN insulation truck environmental information collection signal conditioning curve fiting |
| 基金项目: |
|
| 摘要点击次数: 1457 |
| 全文下载次数: 515 |
| 中文摘要: |
| 针对保温运输车厢内环境信息采集困难、 无线通讯信号易受车厢壁和厢内货物阻隔等问题‘以
Zigbee CC2430 为基础‘设计了保温运输车冷藏厢内环境无线监测网络。 无线采集节点按照一定规则分布在车
厢内‘负责接收并执行协调器发送的采集命令、上传采集的环境信息‘并针对 CO2传感器非线性输出‘在信号
调理基础上‘采用 Matlab 拟合输出曲线‘提高了 CO2浓度测量的准确性。 试验调试结果表明‘该系统功耗低‘在
通信范围内丢包率小于 15%‘性能稳定‘达到预期效果。 |
| 英文摘要: |
| In order to reduce the difficulty of environmental information collection in the carriage of insulation
truck, and the problem of wireless communication signal blocked by stirnwand and goods in the carriage, the paper
designed a wireless network to monitor insulation truck internal environmental information based on Zigbee and
CC2430. Acquisition node of WSN was distributed in carriage of insulation truck with certain rules, and its
responsibility was to upload the collection information, receive and carry out commands sent by the coordinator.
Aiming at the problem of carbon dioxide sensor nonlinear output, the design used Matlab to complete the curve fitting
based on conditioning circuit, which greatly improved the precision of this system to measure carbon dioxide. The
debugging results indicated that the system had low-power consumption, stable performance袁its packet loss rate was
less than 15% within communication distance, and satisfied the anticipated effect. |
|
查看/发表评论 下载PDF阅读器 |
